Other Models

DYNASTY 9400 SLIDING DOOR

SPECIFICATIONS

Supply and install DYNASTY® Model 9400 by Dynamic Closures (specify).

WORK EXCLUDED

The general contractor shall supply adequate wood or metal supports. Minimum structural capacity to support (145kg per linear metre of door).

CONSTRUCTION

Meeting stiles shall be interlocking extruded aluminium members (32mm x 73mm). Sections shall be extruded from aluminium and constructed in accordance with details shown on shop drawings. Should fixed panels be required they shall be of matching construction.Brush weather seal at floor optional.

PANELS

Available in the following materials:

9260: (6.38mm) Clear Laminated Glass
9210: (3mm) Clear Tempered Glass
9220: (6.38mm) Clear Laminated Glass
9230: (3mm) Polycarbonate
9240: (6mm) Polycarbonate
9250: 18ga. Perforated (51%) Visibility Panels

Note: 3mm glass panel material may require a centre horizontal mullion for added strength. All other materials listed may be supplied full height. Minimum panel width 600mm. Conditions apply.

TRACK

Track shall be heavy-duty aluminium [40 (h) mm x 34 (w) mm] extra strength material and shall be surface mounted or recessed as required (specify).

HARDWARE

To be Dynamic’s heavy duty auto retractable cylinder locks on access panels. All other panels shall be secured with a conveniently located shootbolt system that will lock into a specially designed dust resistant floor socket.

FINISH

All models are offered in our standard high quality clear anodised finish, or standard powder coat finishes.

LAYOUT

STACK WIDTH: Panel size plus 80mm
STACK DEPTH: 90mm per pair of panels

Example of a 514mm Panel:
Panels	Stack Width	Stack Depth
4	594mm	180mm
6	594mm	270mm
12	594mm	270mm

It is imperative that ceiling and floor are level.
Stacks left and/or right off wall.
Also available in bi-part stacking half left & half right.
Max. openings to 3,500mm wide do not require floor guides.
Counter height or window situations only, may be
Each side for double sided stack.